First use
17
7. Screw all three handles
6
into the
handle fixture
5
(see fig. K).
8. Use 4 screws and washers (not
included in the product contents) to
secure the base plate on the base.
The type and size of the screws differ
depending on the base used. If
necessary, consult a qualified outlet.
10
First use
− Check the drill and its protective devices for damages and impairments. Only
operate the drill if no damages or impairments can be found.
Operation
WARNING!
Risk of injury!
Accidentally starting the drill may result in severe injury.
− Pull the mains plug out of the socket before you make any adjustments to
the drill’s settings or change tools.
WARNING!
Risk of injury!
Using unsuitable tools poses a high risk of injury.
− Only use tools (drill bits, countersinks etc.) that are not damaged and
suitable for use with the drill in accordance with this user manual.
To Next Page
Loading...
