Workzone WZK 180 - Page 14

14
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZK 180
Using the equipment as a blow-out pistol (Fig. 3)
To use the tyre pressure gauge as a blow-out pistol you must rst un-
screw and remove the hose with the valve adapter for care tyres. Now the
blow-out adapter (7) can be screwed to the tyre pressure gauge.
Range of applications:
For cleaning and blowing out hollow spaces or hard-to-reach areas, as
well as for cleaning soiled equipment. The innitely variable trigger lever
allows an exact dosing of compressed air.
6
8
2
6
7
3
Instructions for the adapter set
For information on the correct use of the adapters for the various valves,
please refer to the following overview.
Ball needle (Figure 4)
Range of applications: For inating balls.
The ball needle can be used to inate a variety of dierent balls.
TIP: To avoid damaging the valve, moisten the needle slightly before
inserting it.
WZK_180_UK.indb 14 21.12.11 14:38