13
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZK 180
6
Operation
ON/OFF switch (4)
To switch on the equipment set the On/O switch (4) to position 1. Move
the On/O switch (4) to position 0 to switch o the equipment.
Important. This equipment is not designed for continuous use.
To prevent the motor from overheating, use the compressor only as fol-
lows:
Within an operating period of 10 minutes the equipment is allowed to
be operated for only 15% of the time, i.e. 1.5 minutes, at its rated perfor-
mance level. For the rest of the time the equipment must be allowed to
cool down (8.5 minutes cooling phase).
Compressed air hose with quick-lock coupling (3)
Connecting:
Insert the nipple of the air tool into the quick-lock coupling, the sleeve
will spring forward automatically.
Disconnecting:
Pull back the sleeve and remove the tool.
Important. When releasing the quick-lock coupling, be sure to hold the
coupling piece to protect yourself against injury from the rebounding
hose.
Tyre pressure gauge with adapters (Fig. 2/Item 6)
Working pressure in bar: 0-8
Range of applications:
The tyre pressure gauge allows you to inate car tyres easily and exactly.
Use the pressure gauge to check the tyre pressure. If the tyre pressure is
too high, you can reduce the pressure with the integrated relief valve (8).
The tyre pressure gauge comes with a valve adapter for car tyre valves.
Important! The pressure gauge is not calibrated! Please check the
tyre pressure immediately after lling with air, for example at your
lling station.
WZK_180_UK.indb 13 21.12.11 14:38
To Next Page
Loading...
