17
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZK 180
7
Data
m Caution!
Disconnect the power cord before doing any cleaning and mainte-
nance work on the appliance.
m Caution!
Wait until the compressor has completely cooled down. Risk of
burns!
m Caution!
Always depressurize the equipment before carrying out any cleaning and
maintenance work. To do so, use the tyre pressure gauge as a blow-out
pistol (see point 8.4) and press the trigger lever until no more air escapes.
Cleaning
• Keep the safety devices free of dirt and dust as far as possible. Wipe
the equipment with a clean cloth or blow it down with compressed air
at low pressure.
• We recommend that you clean the equipment immediately after you
use it.
• Clean the equipment regularly with a damp cloth and some soft soap.
Do not use cleaning agents or solvents; these may be aggressive to
the plastic parts in the equipment. Ensure that no water can get into
the interior of the equipment.
• You must disconnect spraying tools from the compressor before
cleaning. Do not clean the compressor with water, solvents or the like.
Storage
m Caution!
Pull the mains plug out of the socket and ventilate the appliance and all
connected pneumatic tools. Switch o the compressor and make sure
that it is secured in such a way that it cannot be started up again by any
unauthorized person.
WZK_180_UK.indb 17 21.12.11 14:38
To Next Page
Loading...
