Worx LANDROID L WG792E - Programming

17
EN
Programming
Having the installation finished, please refer to the Programming and Troubleshooting Guide included in the packaging to program
the Landroid
®
L .
Ready to go?
The Landroid
®
L is designed for maintaining your grass at a perfect length during the season, but is not designed for deforesting a jungle.
Before starting it for the first time,
1. You should mow your lawn to the desired height.
2. Make sure the operating area is clear of objects such as toys and branches...
3. Adjust the cutting height to its maximum level for the first mow and then adjust to your preferred lawn grass height.
Next Spring, let your Landroid
®
L start mowing early, when the grass is still short, so that you can avoid a preliminary grass cut.
20
25
30
35
40
45
50
55
60