EasyManua.ls Logo

Worx LANDROID L WG792E - Terrain and Slope Handling; Slope Handling; Boundary Wire Placement on Slopes

Worx LANDROID L WG792E
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
EN
If there are roots emerging from the ground, these areas should
be avoided in order not to damage the roots.
Trees
In the case of large bumps or dips, please consider if the blades
could touch the ground; if this is the case, either make the
inclines smoother or exclude those areas from your Landroid
®
L’ s
operation.
Depressions and bumps
Your Landroid
®
L has the ability to safely climb slopes up to 35%
(20°), so just avoid anything steeper than this.
Slopes
The Upper Boundary Wire should NOT be placed on slopes
steeper than 35% (20°). The Upper Boundary Wire should have
a distance of at least 45cm between any obstacles. The Lower
Boundary Wire should NOT be placed on slopes steeper than
25% (15°). The Lower Boundary Wire should have a distance of
at least 55cm between any obstacles when it is positioned on a
slope that is 25%.
Placement of Boundary Wire on slopes
Upper boundary wire
Lower boundary wire
Lower boundary
Wire
35% (20°)

Other manuals for Worx LANDROID L WG792E

Related product manuals