17
EN
MAINTENANCE
Remove the battery pack from the machine before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your
power tool in a dry place. Keep the motor ventilation slots clean. Keep all working
controls free of dust. Occasionally you may see sparks through the ventilation slots.
This is normal and will not damage your power tool.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authorities or
retailer for recycling advice.
TROUBLE SHOOTING
Rotation seems to stop or slow for no reason:
1. Check that the battery is fully charged and properly mounted onto the Hub.
2. Insure the power cord is completely inserted in the tool.
3. Check that the bit or blade is not being twisted or bound in the workpiece.
4. Try using less pressure on the accessory. A light touch is usually sufficient.
5. Try a faster rotation speed.
6. Make sure the tool has reached full rotation speed before engaging the workpiece.
To Next Page
Loading...
