Need help?Do you have a question about the Worx S Basic LANDROID and is the answer not in the manual?
General| Brand | Worx |
|---|---|
| Model | S Basic LANDROID |
| Category | Lawn Mower |
| Language | English |
Read all safety warnings and instructions. Failure to follow may result in injury.
Follow instructions, be familiar with controls, and use appliance properly.
Safe procedures for operation, unattended use, servicing, and storage.
Connect to RCD, wear gloves for blade replacement, use original packaging for transport.
Handle battery pack safely: avoid dismantling, short-circuiting, heat, and impact.
Robotic mower risks, manual reading, distance, disabling device, no burning, proper disposal.
List of all parts included with the Landroid® robotic mower, with their numbers.
Details of the Landroid® control panel, including lights and buttons.
Designed for domestic lawn mowing, maintaining a healthier and better lawn.
Landroid® chooses direction at random for even mowing without unattractive paths.
How Landroid® finds base, detects rain, senses boundary wire, and stops.
How to start mowing, stop the mower, and what to do if an error occurs.
Off-centered blade design for clean cuts near boundaries, minimizing manual trimming.
Mowing time depends on grass type, growth rate, sharpness, humidity, and obstacles.
Adjust cutting height (2-6cm). Mow in dry weather. Protect from lightning storms.
Pegging, burying, and joining the boundary wire for correct mowing area setup.
Software can be updated via USB. Download latest version from www.worxlandroid.com.
Turn off, wear gloves. Replace all blades and screws together for balance.
Replace blades seasonally or when dull. Use spare kits and screws provided.
Turn off, wear gloves. Do not use hose/high pressure washer. Clean body and underside.
Clean body, underside, contact pins, and charging strips for optimal performance.
Battery care, life factors, proper storage, and charging without boundary wire.
Prepare Landroid® for winter: clean, charge battery, turn off, store properly.
Turn off, wear gloves. Remove cover, disconnect old battery, connect new one.
Interprets battery light status: Green (sufficient), Red (low), Flashing (charging/hot).
Interprets error light status: Blue flashing (rain delay).
Troubleshooting common errors: trapped, outside area, blocked motors, lifted up.
Blue light flashing three times. Turn Landroid® upright.
Blade disc not moving, vibration, or uneven cutting due to blade/motor problems.
Errors related to boundary wire placement, connections, and clamping.
Issues with charging time, no charge, short run-times, or incorrect operation time.
Problems with docking, running outside wire, skidding, or going down hills.
To Next Page