Cordless Drill / Driver EN
5
TECHNICAL DATA
WX176L WX176L.1 WX176L.2 WX176L.9
Charger voltage 100-240V~50/60Hz
Rated voltage 20V
Max*
No load speed 0-400/0-1500/min
Clutch positions 11+1
Max torque 265 in.lbs
Chuck capacity 1/4 inch
Max. drilling capacity
Steel 3/8 inch
Wood 1-3/16 inch
Machine weight 3.1 lbs 0.73 lbs
*Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
1. TWO-SPEED GEAR CONTROL
2. FORWARD/REVERSE ROTATION CONTROL
3. ON/OFF SWITCH
4. SOFT GRIP HANDLE
5. BATTERY PACK
6. BATTERY PACK RELEASE BUTTON
7. ELECTRONIC TORQUE-ADJUSTING DIAL
8. COLLET LOCKING SLEEVE
9. DUAL CHUCK RELEASE BUTTON
10. LED LIGHT
To Next Page
Loading...
