What to do if the battery charge indicator does not light up on my Worx WG154 Trimmer?
If the battery charge indicator does not light up on your Worx Trimmer, the plug of the battery charger may not be plugged in properly, so ensure the charger is plugged in correctly. Another possibility is that the socket outlet, mains cable, or battery charger is defective, so check and replace the defective component.
What does continuous lighting of the battery charge indicator mean on a Worx Trimmer?
Continuous lighting of the battery charge indicator on your Worx Trimmer means the battery may not be properly inserted. Ensure you insert the battery properly.
What to do if my Worx Trimmer doesn't cut?
If your Worx Trimmer isn't cutting, several issues might be the cause. First, check if the cutting line is broken and replace it if necessary. Ensure the battery is fully charged. Also, clear any grass entangled around the cutting head. If the motor is broken and the speed is too low, contact an authorized after-sales service agent.
What to do if my Worx WG154 Trimmer runs intermittently?
If your Worx Trimmer runs intermittently, the motor may be broken, in which case you should contact an authorized after-sales service agent. Alternatively, the battery might not be fully charged, so ensure you charge the battery. Also, the On/Off switch could be defective, and you may need to replace it.
Why does the auto feed not work on my Worx WG154?
If the auto feed on your Worx Trimmer isn't working, it could be because the cutting line isn't wound well, the line is tangled, or the line is used up.
What to do if auto feed does not work on Worx Trimmer?
If the auto feed on your Worx Trimmer isn't working, check the following: * Ensure the cutting line is wound properly. * See if the line is tangled, and untangle it. * Check if the line is used up, and replace it if necessary.
What to do if Worx Trimmer has excessive vibrations or noise?
Excessive vibrations or noise from your Worx Trimmer could indicate: * The machine is defective. Contact service agent for repair. * The line spool is not wound well. Rewind the line spool properly.
How to fix Worx Trimmer when auto feed does not work?
If the auto feed on your Worx Trimmer isn't working, it could be because the cutting line isn't wound well, so rewind the line. Another reason may be that the line is tangled, so untangle it. Also, the line might be used up, so replace the cutting line.
How to fix excessive vibrations or noise in Worx WG154?
Excessive vibrations or noise in your Worx Trimmer can be caused by a defective machine, in which case you should contact an authorized after-sales service agent. Alternatively, the line spool might not be wound well, so rewind the line.
Why is the cutting time per battery charge too low on my Worx Trimmer?
If the cutting time per battery charge is too low on your Worx Trimmer, it could be due to a few reasons. If the battery hasn't been used for a long period or has only been charged for a short term, use the battery regularly. If the grass is too high, mow it at a higher cutting height. If the battery is defective, replace it.
General safety precautions for all appliances.
Specific safety for battery-powered garden tools.
Specific safety rules for lawn trimmers and edgers.
Important warnings and precautions for battery packs.
Step-by-step guide for attaching the main handle.
General| Voltage | 20V |
|---|---|
| Battery Type | Lithium-Ion |
| Power Source | Battery |
| Battery Capacity | 2.0 Ah |
| Runtime | Up to 30 minutes |
| Type | Grass Trimmer |
| Cutting Width | 30 cm |
| Line Diameter | 0.065 inches |
To Next Page
