Worx WG324E Series - Component List; Technical Data; Noise Information

16
Cordless Pruning Saw WG324E WG324E.X
COMPONENT LIST
1. CHAIN GUARD
2. HOUSINGCOVER KNOB
3. SECONDARY GRIP AREA
4. LOCKOUT BUTTON
5. ONOFF SWITCH
6. GRIP AREA
7. BATTERY PACK 
8. BATTERY PACK RELEASE BUTTON 
9. CHAIN TENSIONING TOOL
10. HAND GUARD
11. HOUSINGCOVER
12. CHAIN
13. GUIDE BAR
14. CHAIN TENSIONING SCREW
15. BASE PLATE
16. BAR PAD
17. DRIVE SPROCKET
18. FASTENING BAR BOLT
19. BAR LOCATING TAB
20. BAR AND CHAIN SHEATHSCABBARD
21. LOCKOUT BUTTON ON EXTENSION POLE
HANDLE 
22. EXTENSION POLE HANDLE 
23. ONOFF SWITCH ON EXTENSION POLE
HANDLE 
24. LOCKING KNOB 
25. EXTENSION POLE RELEASE BUTTON 
26. CLAMPING LEVER 
* Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type WG324E WG324E.X (3 - designation of
machinery, representative of battery-operated
pruning saw)
WG324E WG324E.X ***
Voltage 20 V Max.**
Bar length 12 cm
Chain speed 6.7 m/s
Chain pitch 7.6 mm
Number of chain drive links 28
Chain gauge 1.1 mm
Adaptive chain type WA0142
Adaptive guide bar type WA0151
Extension pole length 125 cm
Maximum cutting height 275 cm
Extension pole weight 1.1 kg
Machine weight (chain &
bar included)(bare tool)
1.38 kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
*** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
SUGGESTED BATTERIES AND
CHARGERS
Category Type Capacity
20V Battery WA3551 2.0Ah
20V Charger WA3880 2.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
= 79 dB(A)
K
pA
3 dB(A)
A weighted sound power L
wA
= 88.11 dB(A)