EasyManua.ls Logo

Worx WG774 - User Manual

Worx WG774
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WG774
EN
F
ES
3 in 1 Cordless Lawn Mower
Tondeuse à gazon sans fil 3 en 1
Cortacésped sin cables 3 en 1
P08
P19
P31

Table of Contents

Questions and Answers

  • L
    Laura ByrdAug 12, 2025
    How to troubleshoot Worx Lawn Mower that doesn’t run?
    • T
      Tracy BakerAug 13, 2025
      If your Worx Lawn Mower isn’t running when you activate the switch lever: * Check that the safety key is fully installed and seated and that the button on the switch housing is completely pushed. * Release the switch lever to turn the mower off, remove the safety key, turn the mower over, and check that the blade can turn freely. If it cannot, return it to an authorized service center. * Make sure the battery is fully charged by plugging in the charger and waiting for the green light.
  • M
    Matthew CarterAug 16, 2025
    What to do if my Worx WG774 motor stops while mowing?
    • J
      Joan TaylorAug 16, 2025
      If your Worx Lawn Mower motor stops while mowing, there are several things you can check: * Release the Operating Bail to turn the mower off, remove the safety key, and check that the blade is free to turn. If it's not, take it to an authorized servicer. * Raise the cutting height of the wheels to the highest position and start the mower. * Ensure the battery is fully charged by plugging in the charger and waiting for the green light. * Avoid overloading the mower by slowing down your cutting pace or raising the cut height, or both.
  • R
    Rebecca JohnsonAug 20, 2025
    Why is my Worx Lawn Mower not picking up clippings?
    • J
      Jason NunezAug 20, 2025
      If your Worx Lawn Mower isn’t picking up clippings with the grass collection bag, consider the following: * Remove the mulch plate when bagging. * If the chute is clogged, release the switch lever to turn the mower off, remove the safety key, and clear the chute of grass clippings. * Raise the cutting height of the wheels to shorten the length of the cut if there is too much cut grass. * Empty the bag more often if it's full.
  • G
    Glenn LinAug 25, 2025
    What to do if Worx WG774 battery charger LED’s not on?
    • P
      Pamela LopezAug 25, 2025
      Check the plug connection. If that doesn't work, replace the charger for your Worx Lawn Mower.
  • J
    Jeremy WashingtonAug 27, 2025
    Why is my Worx Lawn Mower so noisy and vibrating?
    • M
      michaelrichardsonAug 27, 2025
      If your Worx Lawn Mower is abnormally noisy and vibrates: * Release the Operating Bail to turn the mower off and remove the safety key. Turn the mower on its side and inspect the blade for bending or damage. If the blade is damaged, replace it. If the underside of the deck is damaged, return the mower to an authorized service center. * If there's no visible damage to the blade and the mower still vibrates, release the Operating Bail to turn the mower off, remove the safety key, and remove the blade. Rotate the blade 180 degrees and retighten it. If it still vibrates, take the mower to an authorized service center.
  • T
    Timothy BirdAug 31, 2025
    Why Worx Lawn Mower cutting performance is unsatisfactory?
    • D
      Dawn BurnettAug 31, 2025
      If your Worx Lawn Mower has unsatisfactory cutting performance or doesn’t cut the entire lawn: * Make sure the battery is fully charged by plugging in the charger and waiting for the green light to come on. * Release the Operating Bail to turn the mower off and remove the safety key. Turn the mower over and check the blade for sharpness and the deck and discharge chute for clogging. * Raise the cutting height if it's set too low for the grass condition.
  • V
    Valerie RodriguezSep 4, 2025
    What to do if there are clippings visible when mulching with Worx Lawn Mower?
    • S
      schmidtrobertSep 4, 2025
      If, when mulching with your Worx Lawn Mower, you see visible clippings: * Raise the cutting height of the wheels to shorten the length of the cut, and don't cut off more than 1/3 of the total length. * Check the blade for sharpness and keep it sharp.
  • K
    Kevin JenkinsSep 7, 2025
    How to fix Worx WG774 that is too hard to push?
    • P
      patricia38Sep 7, 2025
      To resolve a Worx Lawn Mower that's too hard to push: * Raise the cutting height to reduce deck drag on the grass. * Check each wheel to ensure it rotates freely.

Worx WG774 Specifications

General IconGeneral
BrandWorx
ModelWG774
CategoryLawn Mower
LanguageEnglish

Related product manuals