Worx WG776E.9 User Manual

14
Cordless lawn mower WG776E WG776E.9
BLADE MAINTENANCE (See Fig. M1,M2)
Renew your metal blade after 50 hours mowing
or 2 years, which ever is the sooner-regardless of
condition.
Follow these procedures to remove and replace the
blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the blade.
Hold the blade (15) and unscrew the blade bolt (14)
counter-clockwise using a spanner wrench, and then
remove blade.
To re-assemble, position the blade (15) with the
cutting edges towards the ground. Then securely
tighten the blade bolt (14).
STORAGE: (See Fig. N1N2 )
Stop the mower and always remove the safety key.
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially from
the ventilation slots.
Turn the machine on its side and clean the blade area.
If grass cuttings are compacted in the blade area,
remove with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage, release the handle cam lever, and
rotate or fold the upper handle.
.
1
2
E2
a
b
I
14
15
M1
D1 F J
M2
D2 G
K-1
K-2
K-3
K
N1
1
E1
1
2
3
4
5
H
L-1
L-2
L-3
L
N2
1
2
E2
a
b
I
14
15
M1
D1 F J
M2
D2 G
K-1
K-2
K-3
K
N1
1
E1
1
2
3
4
5
H
L-1
L-2
L-3
L
N2

Worx WG776E.9 Specifications

General

Brand	Worx
Model	WG776E.9
Category	Lawn Mower
Language	English