11
EN
20V Cordless Brushless
SWITCHDRIVER 2.0
Low speed
Lock
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
2. COMPONENT LIST
1. TWO-SPEED GEAR CONTROL
2.
FORWARD/REVERSE ROTATION CONTROL
3. ON/OFF SWITCH TRIGGER
4. SOFT GRIP HANDLE
5.
ELECTRONIC TORQUE-ADJUSTING INTER-
FACE
6. LED LIGHT
7. 6.35mm HEX QUICK RELEASE CHUCK
8. DUAL CHUCKS ROTATING PLATE
9. ROTATING PLATE RELEASE BUTTON
10. BATTERY PACK*
11. BATTERY PACK RELEASE BUTTON*
*Not all the accessories illustrated or described
are included in standard delivery.
3. TECHNICAL DATA
Type WX177 WX177.X (1-designation of machinery,
representative of Cordless Drill)
WX177 WX177.X**
Rated voltage 20V
Max***
No load speed 0-450/0-1700/min
Clutch positions 9+1
Max torque 50 Nm
Chuck capacity 6.35mm
Max.
drilling
capac-
ity
Steel 13mm
Wood 40mm
Machine weight
(bare tool)
0.82kg
**X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes
between these models.
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
Category Model Capacity
20V Battery WA3551 2.0 Ah
20V Charger WA3880 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
: 72dB(A)
A weighted sound power L
wA
: 83dB(A)
K
PA
& K
WA
5dB (A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Drilling into metal
Vibration emission value
ah,D = 3.37 m/s²
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
To Next Page
Loading...
