Worx WX252 Safety And Operating Manual

14
TROUBLE SHOOTING
Problem Possible cause Solution
Battery will not charge 1. Charger not plugged into a work-
ing outlet.
2. Surrounding air temperature is
too hot or too cold
1. Plug charger into a working
outlet. Check current by plugging
in a lamp.
2. Move charger to an appropriate
place which temperature is suitable
for the charger.
Switch cannot be pressed Forward/Reverse switch at middle
position
Make sure switch is on Forward
or Reverse rotation according to
project need.
XTD Driver stops during driving
screws
XTD Driver battery is out of power Make sure XTD Driver is fully
charged before using it.

Worx WX252 Specifications

General

Power source	Battery
Charging time	5 h
Battery voltage	4 V
Battery capacity	1.5 Ah
Torque (max)	3 N⋅m
Idle speed (max)	230 RPM
Reverse	Yes
Handle shape	Pistol handle
Product type	Power screwdriver
Product color	Black, Orange, Silver
Chuck diameter	-
Adjustable speed	No

Weight and Dimensions

Depth	60 mm
Width	160 mm
Height	230 mm
Weight	700 g