Worx WX252 User Manual

13
EN
Maintain this tool in accordance with these instructions and keep well
lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration and noise
accessories.
Plan your work schedule to spread any high vibration tool use across a number
of days.
OPERATING INSTRUCTIONS
NOTE Before using the tool, read the instruction book carefully.
INTENDED USE
The power tool is intended for driving in and loosening screws as well as for
drilling in wood, metal and plastic.
ACTION FIGURE
BEFORE OPERATION
Charging the Battery
NOTE:
1. Maximize Battery Performance Prior to initial use, the
battery must be charged 5 hours to fully utilize the battery
capacity.
2. When the battery is full charged, the light turns green.
See Fig. A
ASSEMBLY AND ADJUSTMENT
Selecting the Proper Bit See Fig. B
Inserting and Removing bits See Fig. C
Forward/reverse/lock
WARNING Never change the direction of rotation
when the chuck is rotating, wait until it is stopped!
See Fig. D1, D2, D3
Adjust the Extended Shaft Position See Fig. E, F
OPERATION
Operating the On/Off Switch
WARNING Do not operate for long periods at low
speed because excess heat will be produced
internally.
See Fig. G
LED Light Indicator See Fig. G

Worx WX252 Specifications

General

Power source	Battery
Charging time	5 h
Battery voltage	4 V
Battery capacity	1.5 Ah
Torque (max)	3 N⋅m
Idle speed (max)	230 RPM
Reverse	Yes
Handle shape	Pistol handle
Product type	Power screwdriver
Product color	Black, Orange, Silver
Chuck diameter	-
Adjustable speed	No

Weight and Dimensions

Depth	60 mm
Width	160 mm
Height	230 mm
Weight	700 g