Worx WX254 - Switch Lock and Rotation Control

11
10
3. SWITCH LOCK
The On/off Switch (4) can be locked in the OFF position. This
helps to reduce the possibility of accidental starting when the
screwdriver is not in use. To lock the On/off Switch, place the
Forward/Reverse Rotation Control (2) in the center position.
4. FORWARD/REVERSE ROTATION CONTROL
(See Fig. E1, E2)
For drilling and screw driving in a clockwise rotation, move
the switch marked “
” lever to the left. For reverse rotation,
move the switch marked “
” lever to the right).
WARNING: Never change the direction of rotation
when the Chuck is rotating, wait until it has
stopped!
E1
E2
1
2
2
1
1
2
2
1