MAINTENANcE
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage your power tool.
TROUBLE ShOOTING
Problem Solution
The Cover will not slide
forward.
A. Rotate the Bit Cartridge manually to left until the bit aligns with the
“Auto” mark on the tool.
B. Remove the Bit Cartridge and insert again.
The Bit Cartridge will not
to right.
The Bit Cartridge can be only rotated to left.
Bit Cartridge will not rotate
when Cover slides.
Make sure the Cover is fully open and past the red line on the tool.
Drill bits are left in material. Keep the rotating as it is pulled from the material.
Red light does not
illuminate when charger is
plugged in.
Battery is already fully charged.
Trigger will not depress. Set Rotation Control to either forward or reverse.
Driver stops during use. Charge the battery.
To Next Page
Loading...
Need help?
General
