18
contacting a “live” wire may
make exposed metal parts
of the power tool “live” and
could give the operator an
electric shock.
2) Safety instructions when
using long drill bits
a) Never operate at higher
speed than the maximum
speed rating of the drill
bit. At higher speeds, the
bit is likely to bend if allowed
to rotate freely without
contacting the workpiece,
resulting in personal injury.
b) Always start drilling at
low speed and with the
bit tip in contact with
the workpiece. At higher
speeds, the bit is likely to
bend if allowed to rotate
freely without contacting
the workpiece, resulting in
personal injury.
c) Apply pressure only in
direct line with the bit and
do not apply excessive
pressure. Bits can bend
causing breakage or loss of
control, resulting in personal
injury.
SAFETY WARNINGS FOR BAT
TERY CELLS INSIDE THE TOOL
a) Do not dismantle, open or
shred cells.
To Next Page
Loading...
