To Next Page
M
Mary AdamsAug 11, 2025
What to do if my Worx Impact Driver has low battery voltage?
- CChelsea OwensAug 11, 2025
If your Worx Impact Driver indicates low battery voltage, the solution is to remove the battery and recharge it.
What to do if my Worx Impact Driver has low battery voltage?
If your Worx Impact Driver indicates low battery voltage, the solution is to remove the battery and recharge it.
What to do if my Worx Impact Driver is overloaded?
If your Worx Impact Driver is overloaded, release the Trigger Switch on the tool to stop the application that caused the overload. Then, pull the Trigger Switch again to restart the tool.
What to do if my Worx Impact Driver is overheated?
If your Worx Impact Driver is overheated, allow both the tool and the battery to cool down completely before pulling the Trigger Switch again.
General| Voltage | 20V |
|---|---|
| No Load Speed | 0-2900 RPM |
| Chuck Size | 1/4 inch |
| Battery Type | Lithium-Ion |
| Impact Rate | 0-4000 BPM |
| Chuck Type | Quick Release |
