Worx WX372 Safety And Operating Manual

11
10
WX372 WX372.1
WX372.9
Lithium-Ion cordless
hammer drill
for heavy drilling
for drilling in Brickwork and concrete
7. AUTOMATIC SPINDLE LOCK
The automatic spindle lock allows you to use as a
regular screwdriver. You can give an extra twist to
firmly tighten a screw, loosen a very tight screw
or continue working when the battery energy has
expired. For manual screwdriver purposes, the chuck is
automatically locked when the tool is off.
8. SIGHT LIGHT
The Sight Light (8) allows you to keep a clear view
under less illuminated circumstances. To turn on the
light simply press the on/off switch. When you release
the on/off switch, the light will go out.
9. DRILLING
Drilling
Set the Torque adjustment ring to the “Drilling without
impact” symbol . The safety clutch is deactivated in
the “Drilling” position.
Impact Drilling
Set the Torque adjustment ring to the “Impact drilling”
symbol . In the “Impact drilling” position, the safety
clutch is deactivated and the maximum power is always
effective.
Move the drill bit into the workpiece, applying only
enough pressure to keep the bit cutting. Do not force or
apply side pressure to elongate a hole.
Tungsten carbide drill bits should always
be used for concrete and masonry. When
drilling in metal, only use HSS drill bits in good
condition. Always use a magnetic bit holder (not
included) when using short screwdriver bits.
When screw-driving, apply a small quantity of
liquid soap or similar to the screw threads to
ease insertion.
10. DISPOSAL OF AN EXHAUSTED BATTERY
PACK
Li
To preserve natural resources, please recycle
or dispose of the battery pack properly. This
battery pack contains Lithium batteries. Consult
your local waste authority for information regarding
available recycling and/or disposal options. Discharge
your battery pack by operating your drill, then remove
the battery pack from the drill housing and cover the

Worx WX372 Specifications

General

Power source	Battery
Charging time	60 min
Battery voltage	20 V
Battery capacity	2 Ah
Battery included	Yes
Number of batteries included	2 pc(s)
Chuck type	Keyless
Motor type	Brushed
Screwdriving	-
Product design	Pistol grip drill
Torque (max)	50 N⋅m
Number of gears	22
Idle speed (max)	1800 RPM
Idle speed (min)	550 RPM
Chuck capacity (max)	13 mm
Impact rate (high speed)	28800 bpm
Drilling diameter in wood (max)	40 mm
Drilling diameter in concrete (max)	12 mm
Product color	Black, Orange, Silver

Weight and Dimensions

Depth	66 mm
Width	216 mm
Height	189 mm
Weight	1650 g