Worx WX390 - Page 10

Cordless Rotary Hammer EN
10
COMPONENT LIST
1. DUST PROTECTION CAP
2. TOOL HOLDER LOCKING SLEEVE
3. FORWARD AND REVERSE ROTATION CONTROL
4. ON/OFF SWITCH
5. BATTERY PACK*
6. HAMMER DRILL /DRILL SELECTOR DIAL
7. BATTERY PACK RELEASE CLIP
8. LED LIGHT
9. SDS KEYLESS CHUCK ADAPTOR*
10. PH2 SCREWDRIVER BIT*
11. HSS METAL DRILL BIT (5mm,6mm)*
12. SDS PLUS DRILL BITS (6mm,8mm)*
* Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Type WX390 WX390.1 WX390.2 WX390.3 WX390.31 WX390.9 (3- designation of machinery,
representative of Hammer Drill)
WX390 WX390.1 WX390.2 WX390.3 WX390.31
WX390.9
Voltage 20V Max**
No load speed 0-900/min
Impact rate 0-5000bpm
Impact energy 1.2J
Battery capacity
2.0Ah Li-Ion 2.5 Ah Li-ion
2.0 Ah/4.0 Ah
Li-ion
3.0Ah Li-Ion /
Max.
drilling
capacity
Steel
10mm
Wood
13mm
Concrete
13mm
Brickwork
13mm
Machine weight 1.6kg
1.2kg
**Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is
18 volts.