Worx WX800 Original Instructions

11
ENLithium-Ion cordless angle grinder
5. When cutting very hard material best results can
be achieved with a diamond disc.
6. When using a diamond disc it will become very
hot. If this happens you will see a full ring of
sparks around the rotating disc. Stop cutting and
allow to cool at no load speed for 2-3 minutes.
7. Always ensure the workpiece is firmly held or
clamped to prevent movement.
MAINTENANCE
Remove the battery before carrying out any
adjustment, servicing or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
TROUBLESHOOTING
Although your new angle grinder is really very
simple to operate, if you do experience problems,
please check the following:
1. If your grinder wheel wobbles or vibrates, check
that outer flange is tight; check that the wheel is
correctly located on the flange plate.
2. If there is any evidence that the wheel is
damaged do not use as the damaged wheel may
disintegrate, remove it and replace with a new
wheel. Dispose of old wheels sensibly.
3. If working on aluminum or a similar soft alloy,
the wheel will soon become clogged and will not
grind effectively.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Angle Grinder
Type WX800 WX800.9 (800-819 -designation
of machinery, representative of Angle Grinder)
Function Peripheral and lateral grinding
Complies with the following directives,
2006/42/EC
2011/65/EU
2014/30/EU
Standards conform to:
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-3
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe)Ltd, PO
Box 6242, Newbury, RG14 9LT, UK
Suzhou 2016/07/20
Allen Ding
Deputy Chief Engineer,Testing & Certification

Worx WX800 Specifications

General

Spindle thread	M14
Idle speed (max)	8600 RPM
Grinding disc diameter	- mm
Input power	- W
Power source	Battery
Battery voltage	20 V
Soft grip	Yes
Product color	Black, Grey, Orange
Number of handle positions	2

Weight and Dimensions

Width	76 mm
Height	105 mm
Length	360 mm
Weight	1540 g