Wren INFINITY PLUS - User Manual

Need help?

Do you have a question about the Wren INFINITY PLUS and is the answer not in the manual?

Summary

Drawer Adjustments

Up & Down Adjustment

Adjusts drawer frontal height for standard and deep drawers by turning screws.

Rear Elevation Adjustment

Adjusts the rear elevation of deep drawers using a screw at the back.

Left & Right Adjustment

Adjusts drawer frontal position left or right using fixing clips at the bottom.

Fit Cover Caps

Fits drawer cover caps over the drawer side adjustment screws.

Drawer Removal and Insertion

Drawer Removal

Lift the drawer front smoothly to disconnect the runner from the base connectors.

Drawer Insertion

Align drawer groove with runner, pull lips until a click is heard to secure.

This document outlines the adjustment and removal procedures for the Infinity Plus Drawer Box, a component designed for Wren kitchens. It provides detailed, step-by-step instructions for various adjustments and the complete removal and reinstallation of the drawer, ensuring proper functionality and alignment.

Function Description

The Infinity Plus Drawer Box is a kitchen drawer system that allows for precise adjustments to its position and easy removal for maintenance or relocation. Its primary function is to provide storage within kitchen units while offering flexibility in its setup. The system is designed to be user-friendly, enabling homeowners or installers to fine-tune the drawer's alignment in multiple directions—up/down, left/right, and rear elevation—to achieve a seamless look and smooth operation. The removal and reinstallation process is also straightforward, facilitating tasks such as cleaning, accessing the back of the cabinet, or replacing the drawer if needed. The drawer box integrates with runners that allow for full extension, providing complete access to the contents within.

Usage Features

The Infinity Plus Drawer Box offers several usage features that enhance its functionality and ease of maintenance:

Up & Down Adjustment: This feature allows users to precisely control the vertical height of the drawer frontal. For standard drawers, this involves loosening a top screw and turning a bottom screw to adjust the height, then re-tightening the top screw to secure the position. Deep drawers have a similar mechanism but require loosening two top screws before adjusting the bottom screw. This ensures that the drawer frontal aligns perfectly with adjacent cabinet doors or other drawer frontals, contributing to a uniform kitchen aesthetic.
Rear Elevation Adjustment (Deep Drawer Specific): This adjustment is particularly useful for deep drawers, allowing the user to fine-tune the rear height of the drawer. By turning a screw located at the back of the drawer, the rear elevation can be adjusted. This helps in ensuring that the drawer sits level within the cabinet and operates smoothly, preventing any tilting or uneven movement that might occur due to variations in cabinet construction or runner installation.
Left & Right Adjustment: To achieve perfect horizontal alignment, the drawer frontal can be adjusted left or right. This is done by pressing in fixing clips located at the bottom of the frontal on both sides of the drawer. Once the clips are pressed, the frontal can be slid horizontally to the desired position. Releasing the clips then secures the frontal in its new alignment. This feature is crucial for maintaining consistent gaps between drawer frontals and cabinet frames, enhancing the overall visual appeal of the kitchen.
Drawer Removal: The drawer box is designed for easy removal. To remove a drawer, it must first be pulled out to its full extension. Then, in a smooth motion, the front of the drawer is lifted. This action disconnects the drawer from the runner connectors. A distinct "click" sound indicates that the drawer has successfully separated from the runners. It is important to perform this motion with sufficient force and to avoid lifting the runners themselves. This feature simplifies cleaning the drawer or the cabinet interior, accessing plumbing or electrical components behind the drawer, or replacing the drawer entirely.
Drawer Reinstallation: Reinstalling the drawer is equally straightforward. The drawer runners must first be fully extended from the unit. The drawer is then placed onto the runners, ensuring that the groove on the drawer sides aligns with the runner mechanism. Once properly positioned, the drawer is pushed forward until the protruding lips on the ends of the runners engage, and a "click" is heard. This click confirms that the drawer is securely located and attached to the runners. After this, the drawer can be pushed back into the unit. This ease of reinstallation ensures that the drawer can be quickly and correctly put back into service.
Cover Caps: After making adjustments to the drawer side, cover caps are provided to fit over the adjustment screws. These caps serve an aesthetic purpose, concealing the screws for a cleaner finish, and also protect the screws from dust and debris, contributing to the longevity of the adjustment mechanism.

Maintenance Features

The Infinity Plus Drawer Box incorporates features that simplify maintenance and ensure long-term performance:

Easy Access for Cleaning: The ability to easily remove the drawer allows for thorough cleaning of both the drawer box itself and the interior of the cabinet. This is particularly useful in a kitchen environment where spills and crumbs are common, helping to maintain hygiene and prevent pest issues.
Troubleshooting and Adjustment: The multiple adjustment points (up/down, left/right, rear elevation) mean that minor misalignments or operational issues can be easily corrected without needing to dismantle the entire cabinet. This reduces the need for professional intervention for common problems and extends the lifespan of the drawer system by allowing for precise tuning as needed over time.
Simple Component Replacement: Should any part of the drawer box or its runners become damaged, the modular design and easy removal process facilitate the replacement of individual components. This is more cost-effective and less disruptive than replacing an entire cabinet or drawer unit.
Protective Cover Caps: The inclusion of cover caps for adjustment screws not only improves aesthetics but also protects the screw mechanisms from dust, moisture, and physical damage. This small detail contributes to the durability and reliable operation of the adjustment features over many years of use.
Standard Tools: The adjustments and removal processes primarily require a standard cross-head screwdriver, making maintenance accessible to most homeowners without the need for specialized tools. This simplicity encourages regular upkeep and minor repairs.

In summary, the Infinity Plus Drawer Box is designed with both functionality and user convenience in mind, offering a robust and adjustable storage solution for modern kitchens.