Please follow the rules below to avoid heavy accidents.
˜
Never use the equipment to do other things but welding.
˜
Follow related regulations for the construction of the input-driven power source, choice of place,
usage of high-pressure gas, storage, configuration, safe-keeping of workpiece after welding and
disposal of waste, etc.
˜
Nonessentials do not enter the welding area.
˜
People using heart pacemaker is not allowed to get close to the welding machine or area
without doctor’s permission. The magnetism created by energizing the welding machine can
have a bad effect to the pacemaker.
˜
Install, operation, check and maintain the equipment by profession personnel.
˜
Understanding the contents of the user manual for safety.
Please follow the rules below to avoid electric shock。
˜
Keep away from any electric parts.
˜
Earth the machine and workpiece by professional personnel.
˜
Cut off the power before installation or checking, and restart 5 minutes later. The capacitance is
chargeable device. Please ensure it has no voltage before start again even if the power source
is cut off.
˜
Do not use wire with inadequate section surface or damage insulation sleeve or even exposed
conductor.
˜
Do ensure well isolation of wire connection.
˜
Never use the device when the enclosure is removed.
˜
Never use broken or wet insulation gloves.
˜
Use firenet when work at high position.
˜
Check and maintain regularly, don’t use it until the broken parts are fixed well.
˜
Turn off the power when not in used.
˜
Follow the national or local related standard and regulations when using the AC welding
machine at narrow or high position.
To Next Page
Loading...
Need help?
General