Please follow the below notes to avoid fire and explode, etc.
˜
No combustible in welding area.
˜
Keep off combustible when welding.
˜
Keep hot workpiece after welding away from flammable gas.
˜
Do move away the combustible around when weld the dooryard, ground and wall,.
˜
The wire connection of base metal should be as close to the welding place as possible.
˜
Never weld those facilities with gas pipe or airtight slot.
˜
Put fire extinguisher around the welding area to prevent fire.
The gas and fumes are harmful to health, please wear protective device
according to regulations.
˜
Wear exhaust equipment and breathe preventive facilities to prevent gas poisoning or choke.
˜
Use suggested part exhaust equipment and breathe preventive facilities to prevent hurt or
poisoning by gas and other powder, please.
˜
To prevent oxygen-deficiency, air out the gas-filled room which is full of CO2 and argon on the
bottom, when operating on trunks, boilers, cabins, etc.
˜
Please accept the supervisor’s inspection when operating in narrow space. Air the room and
wear breathe preventive facilities.
˜
Never operate in degrease, washing or spray space.
˜
Using breathe preventive facilities when weld shielded steel for it will cause poisonous dust and
gas.
The arc, spark, residue and noise are harmful to health, please wear
protective appliance.
˜
Eye protection against arc is recommended when welding or supervise welding.
˜
Please wear preventive spectacles.
˜
Welder’s gloves, welder’s goggles, long sleeve clothes, leather apron, and other standard
protection equipments must be worn for welding operation.
˜
A screen to protect other people against the arc must be set in the welding place.
To Next Page
Loading...
Need help?
General