Please follow the notes below to avoid gas cylinder toppling over or
broken.
˜
Use the gas cylinder correctly.
˜
Use the equipped or recommended gaseous regulator.
˜
Read the manual of gaseous regulator carefully before using it, and pay attention to the safety
notes.
˜
Fix the gas cylinder with appropriative holder and other relative parts.
˜
Never put the cylinder under high temperature or sunshine environment.
˜
Keep your face away from the gas cylinder exit when opening it.
˜
Put on the gas shield when it is not used.
˜
Never put the torch on the gas cylinder. The electrode can not meet the gas cylinder.
Any touch of the switch part will cause injury, please note the following.
˜
Never use the machine when the enclosure is off.
˜
Install, operate, check and maintain the machine by professional person.
˜
Keep your fingers, hair, clothes etc. away from the switch parts such as the fan.
The wire end may deal damage, please note the following.
˜
Never look into the electric conduction hole when checking the wire feeding is normal or not, or
the shooting wire may stab your eyes and face.
˜
Keep your eyes, face or other naked parts away from the end of torch when feeding the wire
manually or pressing the switch.
For better work efficiency and power source maintenance, please note
the following.
˜
Precautions against toppling over.
˜
Never use the welding equipment for pipe thawing.
To Next Page
Loading...
Need help?
General