Need help?Do you have a question about the wtw inoLab pH/Cond Level 1 and is the answer not in the manual?
General| Measurement Parameters | pH, mV, Conductivity, Temperature, Salinity, TDS |
|---|---|
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.01 pH |
| mV Resolution | 0.1 mV |
| Conductivity Accuracy | ±0.5% of value |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.1 °C |
| Memory | 500 data sets |
| Interface | USB |
| Dimensions | 230 x 190 x 80 mm |
| Conductivity Resolution | 0.01 µS/cm |
| Temperature Measurement Range | -5 to 105 °C |
| Salinity Measurement Range | 0.0 to 70.0 ppt |
| TDS Measurement Range | 0 to 1999 mg/L |
| Temperature Compensation | Automatic |
| Display | LCD |
| Power Supply | 4 x AA batteries or |
Details the instrument's keypad layout and button functions for operation.
Explains the various elements and indicators shown on the instrument's display screen.
Identifies and describes the different connectors and ports on the instrument.
Illustrates the instrument's mode selection and navigation flow.
Defines the intended users and explains safety symbols used in the manual.
Outlines the proper applications and essential safety instructions for instrument operation.
Details conditions for safe use and responsibilities when handling chemicals.
Instructions for connecting the optional plug-in power supply to the instrument.
Lists the items included in the package upon purchase.
How to turn on the instrument and start measurement mode.
Preparatory steps and procedures for pH and Redox measurements.
Detailed steps for performing pH measurements using the instrument.
Detailed steps for performing Redox voltage measurements with the instrument.
Explains the importance of calibration and introduces different calibration procedures.
Step-by-step guide for performing AutoCal TEC pH calibration.
Step-by-step guide for performing AutoCal DIN pH calibration.
Step-by-step guide for performing ConCal pH calibration (two-point/single-point).
Introduces conductivity measurement capabilities including parameters and functions.
Guides on performing conductivity and specific resistance measurements.
Steps for measuring the salinity of a sample using the instrument.
Instructions for measuring Total Dissolved Solids (TDS) in a sample.
Explains the AutoRead function for ensuring stable conductivity measurements.
Explains why cell constant determination is necessary and outlines the process.
Detailed procedure for determining the cell constant using a calibration standard.
Instructions for manually setting the cell constant based on manufacturer data.
Guides on configuring non-linear, linear, and disabling temperature compensation.
Customizing settings for temperature probes, units, and reference temperatures.
Procedure to reset pH and conductivity settings to factory defaults.
Describes the primary maintenance task: battery replacement.
Guidelines for cleaning and disinfecting the instrument's housing.
Information on the proper disposal of the instrument and its components.
Troubleshooting guide for common error messages related to pH measurements.
Troubleshooting guide for common error messages related to conductivity measurements.
Addresses general operational issues like low battery or unresponsive keys.
Provides specifications like ambient temperature, dimensions, weight, and compliance standards.
Details the measuring ranges and resolution for pH and Redox measurements.
Details the measuring ranges, resolution, and accuracy for conductivity measurements.
Explains abbreviations used throughout the operating manual and on the instrument display.
Provides definitions for technical terms related to the instrument and measurements.
An alphabetical index to help locate specific topics within the manual.
Presents the EMC test certificate demonstrating compliance with relevant standards.
Points to resources for additional application notes and literature.
To Next Page
