Need help?Do you have a question about the wtw Cond 1970i and is the answer not in the manual?
General| Temperature Accuracy | ±0.1 °C |
|---|---|
| Protection class | IP 67 |
| Temperature Compensation | Automatic |
| Temperature Resolution | 0.1 °C |
| Conductivity Measuring Range | 0.0 µS/cm to 1000 mS/cm |
| Temperature Measuring Range | -5.0 °C ... +105.0 °C |
| Salinity Measuring Range | 0.0 ... 70.0 |
| TDS Measuring Range | 0 ... 1999 mg/l |
| Resolution | 0.001 µS/cm to 0.1 mS/cm depending on range |
| Display | LCD |
| Power Supply | 4 x AA batteries or NiMH rechargeable batteries |
| Weight | approx. 400 g |
| Conductivity Accuracy | ±0.5% of value |
| Interface | RS-232 |
Specifies the intended and authorized applications for the measuring instrument.
Provides essential safety guidelines for operating and maintaining the instrument.
Covers the general process and modes for taking measurements.
Explains the importance and methods for setting the cell constant.
Explains temperature compensation methods and settings.
Covers the instrument's data storage capabilities and methods.
Options and methods for transmitting data from the instrument.
Guide to customizing instrument settings like baud rate and reference temperature.
Procedures for resetting measurement and configuration parameters to default.
To Next Page
