Do you have a question about the wtw pH/Cond 340i and is the answer not in the manual?
mV Resolution | 0.1 mV |
---|---|
Temperature Resolution | 0.1 °C |
Protection Class | IP 54 |
Measurement Parameters | pH, Conductivity, Temperature, Salinity, TDS |
Conductivity Accuracy | ±0.5% of reading |
Temperature Accuracy | ±0.1 °C |
Salinity Measurement Range | 0.0 ... 70.0 |
Display | LCD |
Interface | USB |
Power Supply | 4 x AA batteries |
Overview of the instrument's capabilities and general features for pH and conductivity measurements.
Details on available equipment sets and accessories for the measuring instrument.
Explanation of the instrument's keypad layout and the functions of its display elements.
Description of the instrument's jack field and connection ports for sensors and power.
Diagram illustrating the instrument's operating modes and navigation flow.
Defines the authorized applications and general safety instructions for operating the instrument.
Lists the items included in the instrument's scope of delivery and outlines initial setup procedures.
Covers switching the instrument on and understanding its initial state and measuring modes.
Detailed procedures for measuring pH and ORP values, including preparation and specific measurements.
Explains various pH calibration methods: AutoCal TEC, AutoCal DIN, and ConCal.
Guides on measuring conductivity and salinity, including cell constant and temperature settings.
Covers manual saving, AutoStore, outputting data, and clearing memory.
Details on transmitting data via interface, intervals, PC/printer connection, and remote control.
Instructions for customizing instrument parameters and performing resets.
Instructions for instrument maintenance, battery replacement, and cleaning procedures.
Guidelines for the proper disposal of the instrument, packaging, and batteries.
Troubleshooting guide for pH and conductivity system error messages and causes.
Addresses general instrument errors, such as LoBat, no response, and probe issues.