Need help?Do you have a question about the wtw pH/Cond 3320 and is the answer not in the manual?
General| Measurement Parameters | pH, Conductivity, Temperature, Salinity, mV |
|---|---|
| Temperature Resolution | 0.1 °C |
| Protection Class | IP67 |
| Memory | 500 data sets |
| pH Measurement Range | -2.0 to 20.0 pH |
| Conductivity Measurement Range | 0.0 µS/cm to 1000 mS/cm |
| Temperature Measurement Range | -5.0 to 105.0 °C |
| pH Resolution | 0.01 pH |
| Conductivity Resolution | 0.01 μS/cm ... 0.1 mS/cm |
| Salinity Measurement Range | 0.0 to 70.0 PSU |
| mV Measurement Range | ±1200 mV |
| Temperature Compensation | Automatic/Manual |
| Display | LCD |
| Power Supply | 4 x AA batteries or rechargeable batteries |
| Weight | 400 g |
| Accuracy | ±0.5% of value (conductivity), ±0.1 °C |
Provides essential safety instructions, warning symbols, and information sources.
Outlines authorized use, requirements, and consequences of unauthorized use.
Explains keypad functions, display layout, and status indicators.
Explains how to navigate through menus, submenus, and settings.
Covers reasons for calibration and the two-point to seven-point procedure.
Explains how to measure conductivity, including cell constant settings.
Details how to determine the cell constant for conductivity measurement.
Explains how to transmit current data, stored values, and calibration records.
Lists causes and remedies for errors and issues during pH/ORP measurements.
Lists causes and remedies for errors and issues during ISE measurements.
Lists causes and remedies for errors and issues during conductivity measurements.
Details the measuring ranges, resolution, and accuracy for pH, ORP, ISE, and Cond.
To Next Page
