wtw pH/Cond 3320 - Navigation Example 1:Setting the Language

Operation pH/Cond 3320
18 ba77054e03 03/2018
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>.
Example: Display the Calibration record function.
 Messages
Information is marked by the i symbol. It cannot be selected. Example:
4.4.5 Navigation example 1:Setting the language
1. Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
Language: Deutsch
Beep: Off
Illumination: On
Contrast: 50 %
Switchoff time: 1 h
Temperature unit: °C
Stability control: On
General
15.02.2014
14:15
Back
Calibration record
Calibration data storage
Buffer: TEC
One point calibration: Yes
Calibration interval: 7 d
Unit for slope: mV/pH
i 2.00 4.01 7.00 10.01 (25 °C)
pH
15.02.2014
14:15
Back
Calibration record
Calibration data storage
Buffer: TEC
One point calibration: Yes
Calibration interval: 7 d
Unit for slope: mV/pH
i 2.00 4.01 7.00 10.01 (25 °C)
pH
15.02.2014
14:15
Back