wtw pH/Cond 3320 - Commissioning; Initial commissioning

pH/Cond 3320 Commissioning
ba77054e03 03/2018 11
3 Commissioning
3.1 Scope of delivery
 MeterpH/Cond 3320
 4 batteries 1.5 V Mignon type AA
 Short instructions
 CD-ROM with
– USB drivers
– detailed operating manual
– Software MultiLab Importer
3.2 Power supply
The pH/Cond 3320 is supplied with power in the following ways:
 Battery operation (4 x alkaline manganese batteries, type AA)
 USB operation via a connected USB-B cable
3.3 Initial commissioning
Perform the following activities:
 Insert the supplied batteries
 Switch on the meter
(see section 4.2 S
WITCHING ON THE METER, page 15)
 Set the date and time
(see section 4.4.6 E
XAMPLE 2 ON NAVIGATION: SETTING THE DATE AND TIME,
page 20)