wtw pH/Cond 3320 - Data memory; Manual storage

Data memory pH/Cond 3320
66 ba77054e03 03/2018
10 Data memory
You can transmit measured values (datasets) to the data memory:
 Manual data memory (see section 10.1 M
ANUAL STORAGE, page 66)
 Automatic storage at intervals (see section 10.2 A
UTOMATIC DATA STORAGE
AT INTERVALS, page 67)
10.1 Manual storage
You can transmit a measurement dataset to the data memory as follows.
With each data storage process, the current datasets of the sensors indicated
on the display are transmitted to the interface at the same time.
With each data storage process, the current datasets of the sen-
sors indicated on the display are transmitted to the interface at the
same time.
1. Press the <STO> key shortly
.
The menu for manual data storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<>< > and <ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
15.02.2014 11:24:16
pH 7.000 24.8 °C AR +++
ID number: 1
Continue
Manual data storage 4 von 500
15.02.2014
14:15
Back