wtw pH/Cond 3320 - Display; Status Information (Meter)

Operation pH/Cond 3320
14 ba77054e03 03/2018
4.1.2 Display
4.1.3 Status information (meter)
1 Status information (sensor)
2 Measured value (with unit)
3 Measured parameter
4 Continuous measurement control (CMC function)
5 Channel display: Plug position of the sensor
6 Sensor symbol (calibration evaluation, calibration interval)
7 Measured temperature (with unit)
8 Status information (meter)
9 Softkeys and date + time
AR Stability control (AutoRead) is active
HOLD Measured value is frozen (<AR> key)
Batteries are almost empty
Data are automatically output to the USB-B interface at
intervals
HOLD AR
25.0
6.093
pH
°C
4
3
2
6
7
8
9
1
AutoCal TEC
5
15.02.2014
14:15
USB output