wtw pH/Cond 3320 - Operation; General operating principles

pH/Cond 3320 Operation
ba77054e03 03/2018 13
4Operation
4.1 General operating principles
4.1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g. <ENTER
_ >).
<F1>:
<F1
_ >:
<F2>:
<F2
_ >:
Softkeys providing situation dependent functions, e.g.:
<F2>/[USB output]:
Outputs data to the USB interface
<F2_ >/[USB output]:
Configures the automatic data output to the USB inter-
face
<On/Off>: Switches the meter on or off
<M>: Selects the measured parameter / Quits the settings
<CAL>:
<CAL
_ >:
Calls up the calibration procedure
Displays the calibration data
<STO>:
<STO
_ >:
Saves a measured value manually
Opens the menu for the automatic save function
<RCL>:
<RCL
_ >:
Displays the manually stored measured values
Displays the automatically stored measured values
<>< >:
< _>< _>:
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
<ENTER>:
<ENTER
_ >:
Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
<AR> Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
F1
F2
STOSTO
RCL
ARAR