Need help?Do you have a question about the wtw LF 320/SET and is the answer not in the manual?
General| Temperature accuracy | ±0.1°C |
|---|---|
| Reference temperature | 20°C or 25°C |
| Display | LCD |
| Protection class | IP67 |
| Salinity measuring range | 0.0 to 70.0 PSU |
| Temperature measuring range | -5.0 to 105.0 °C |
| Cell constant | 0.475 |
| Resolution | 0.01 µS/cm |
| Temperature Compensation | Automatic |
| TDS measuring range | 0 to 1999 mg/L |
| Conductivity accuracy | ±0.5% of value |
Defines the display elements and their meanings for the LF 320 instrument.
Details the function of each key on the LF 320 instrument's keypad.
Identifies the connection socket and its purpose on the LF 320.
Guides the user through the initial setup and power-on procedures for the LF 320.
Covers the various measurement functions and procedures for the LF 320.
Explains how to perform conductivity measurements using the LF 320 instrument.
Details how to adjust the cell constant for accurate conductivity measurements on the LF 320.
Describes how to configure the temperature compensation function for the LF 320.
Instructions for measuring salinity with the LF 320 conductivity meter.
Procedure for measuring TDS using the LF 320 instrument.
Explains how to choose the reference temperature setting on the LF 320.
Guides on how to switch between automatic and manual measurement ranges for the LF 320.
Covers the functions for storing, reading, and erasing measured values on the LF 320.
Details the process of saving measurements to the LF 320's internal memory.
Explains how to retrieve stored measurements from the LF 320.
Instructions for clearing stored data from the LF 320's memory.
Information on the power source and battery operation for the LF 320.
Details on how to operate and manage the batteries for the LF 320.
Provides guidance on the maintenance and cleaning procedures for the LF 320.
Information regarding the maintenance requirements of the LF 320.
Instructions for cleaning the LF 320 instrument.
Lists common error messages and their solutions for the LF 320.
Presents the technical specifications and parameters for the LF 320.
Details the physical components and build of the TetraCon® 325 conductivity cell.
Covers the operational aspects and care for the TetraCon® 325 cell.
Provides methods for cleaning the TetraCon® 325 conductivity cell.
Discusses the lifespan and factors affecting the TetraCon® 325 cell.
Guidance on the proper disposal of the TetraCon® 325 conductivity cell.
Illustrates the pinout and configuration of the TetraCon® 325 cell's connector.
Lists the technical specifications for the TetraCon® 325 conductivity cell.
Lists different types of conductivity cells available for the LF 320 system.
Presents optional accessories recommended for use with the LF 320.
Lists spare parts and consumables for the LF 320 system.
To Next Page
