3
Product Operation
1. About Product
The T103 Pro/T103W Pro is a multifunctional flashlight for use in exploration and rescue
efforts. It utilizes 1 × CREE XHP35 LED, powered by 1 × high drain 18650 Li-ion battery, it
emits 1280 lumen at max output and lights areas as far away as 508 meters. The built-in
Type-C charging design makes it more convenient to use.
2. Installation
Please remove the insulation plate before using.
3. Operation
1. ON/OFF: Tap on the tail switch to activate timed on mode, click to activate constant
on mode, and click again to turn the light off.
2. Output selection: When the light is on, click on the switch once to cycle through Eco-
Low-Med-High-Turbo outputs.
3. Instant Turbo: When the light is on, press and hold the switch to activate Turbo.
Release to return to the previous status. Note: Please use the included WUBEN high
drain 18650 Li-ion battery, or the product may fail to activate Turbo.
4. Flash mode: Double click on the switch to swap between Strobe and SOS, and click
once to return to the previous status.
To Next Page
Loading...
Need help?
General
