WUNDER SA.BI.SRL USER MANUAL
ASEP-ASEP-P INOX REV.01 15/12/2016 8
5.7.2 Cancel the Fixed Unit Price Function
a. Press F again to cancel the FIXED UNIT PRICE FUNCTION
b. The FIXED UNIT PRICE INDICATOR is off
5.8 NON-WEIGHED ARTICLES
Total price of a certain quantity of non-weighed articles can be obtained by the following procedures.
a. Enter unit price per piece by the numeric and decimal keys
b. Press X
c. Enter the quantity of total pieces by numeric keys. Only integer value will be accepted
d. WEIGHT panel shows “n. #”, which # is the quantity entered in step c. Total price of the non-weighed articles is
shown on the TOTAL PRICE panel
e. If figures are wrongly entered in a or c, press CLEAR once to re-enter the figure or press it twice to quit and return
to normal.
5.9 MEMORY FUNCTIONS
5.9.1 Accumulate a Transaction to Memory
a. Refer to 5.3.1 to 5.3.2 for transaction weighing
b. Press M+ to save and accumulate data of current transaction to memory
c. Scale displays “P.P. #” on UNIT PRICE panel,
M+ INDICATOR and ACCUMULATED TOTAL PRICE INDICATOR appear to indicate that memory contains data while
value shown on TOTAL PRICE panel is the total accumulated value
NOTE: “P.P. #” means the total number of transactions saved in memory.
d. Scale return to normal display when article is removed from the platter. ACCUMULATED TOTAL PRICE INDICATOR will
go off automatically
e. Repeat a to c for subsequent transactions
5.9.2 Accumulate Price to Pay of Non-Weighed Articles to Memory
a. Refer to 5.8 to obtain total price to pay of non-weighed articles
b. Press M+ to save the result to memory
c. Scale displays “P.P. #” on UNIT PRICE panel
M+ INDICATOR and ACCUMULATED TOTAL PRICE INDICATOR appear to indicate that memory contains data while
value shown on TOTAL PRICE panel is the total accumulated amount
NOTE: “P.P. #” means the total number of transactions saved in memory.
5.9.3 Memory Recall
5.9.3.1 To recall price to pay of individual transaction
a. Press MR
To Next Page
Loading...
