WUNDER SA.BI.SRL USER MANUAL
ASEP-ASEP-P INOX REV.01 15/12/2016 12
7. TROUBLE SHOOTING
Syndrome Indicator cannot be turned on
Check: Is the indicator powered properly?
Action: Check power supply to indicator.
Syndrome Indicator turned off automatically
Check Is Auto Power Off Function employed?
Action Refer to 4.2.2 to disable Auto Power Off Function.
Check Is the LOW BATTERY INDICATOR on?
Action Check power supply.
Syndrome Rated capacity cannot be reached
Check Is the NET INDICATOR on?
Action: Turn the indicator off. Remove all loads and turn on again.
Check Is there anything obstructing the scale?
Action Remove all obstacles.
Syndrome Blank WEIGHT and TOTAL PRICE panels with zero value in UNIT PRICE panel
Check Is the load applied to scale excess the rated capacity?
Action Remove all loads and try again.
Syndrome Display shows 00000 after counting down
Check Is the load applied to platter excess the rated capacity of scale?
Action Remove all loads from platter and try again.
Syndrome Weighing result is not accurate
Check Is the scale placed in a level condition?
Action Obtain a level condition.
Check Is the scale affected by airflow, vibration or RFI?
Action: Place the scale away from all disturbances.
Check Is the indicator calibrated correctly?
Action Contact your dealer.
To Next Page
Loading...
