To Next PageTo Next Page
Need help?Do you have a question about the Würth EAG 20-230 and is the answer not in the manual?
Match plugs to outlets. Avoid body contact with earthed surfaces. Keep tools away from rain and wet conditions.
Stay alert, use PPE, prevent unintentional starting, remove adjusting keys before operation.
Kickback is a sudden reaction. Avoid it with a firm grip and proper positioning.
Connect to the correct power supply voltage indicated on the nameplate.
Use the tool only with the specified voltage to avoid damage or fire.
Ensure switch is in OFF position before plugging in to prevent injury.
Install and adjust wheel guard for protection against grinding stone damage.
Check grinding stone for damage and install securely. See installation section.
Perform a trial run before operation with grinding stone pointed away from people.
Step-by-step instructions for installing and removing the grinding stone.
Avoid excessive pressure. Grinding is done by the tool's weight. Apply lightly.
Use a 15-30 degree angle for proper grinding, not the entire surface.
How to grind with a new grinding stone to round the edge before normal use.
General