To Next PageTo Next Page
Need help?Do you have a question about the Würth EWS 14-125-E Universal and is the answer not in the manual?
General| Power | 1400 W |
|---|---|
| Disc diameter | 125 mm |
| No-load speed | 11000 RPM |
| Power Source | Electric |
| Spindle thread | M14 |
| Cable length | 4 m |
Explains hazard level symbols and their meanings.
Explains symbols, handling steps, and item numbering.
Covers device modification, repairs, and child safety.
Details intended use, accessory compatibility, and risks.
Covers attachment speed, dimensions, fit, and condition.
Emphasizes PPE and keeping a safe distance from the work area.
Guides on tool handling, mains lead, and operational environment.
Explains recoil and how to avoid it by controlling forces.
Advice on absorbing recoil and specific safety for grinding.
Details correct use of flanges and wheel compatibility.
Specific precautions for cut-off grinding and safe sanding practices.
Precautions for using wire brushes and safety hoods.
Warns about hazardous dusts and recommends PPE.
Covers workpiece stability and electrical hazards.
Lists materials/conditions to avoid and proper tool handling.
Defines the tool's purpose and lists its main components.
Advises checking mains power compatibility before first use.
Instructions on fitting the auxiliary handle and safety hood.
Specific instructions for fitting safety hood and grinding wheels.
How to lock spindle and tighten/loosen the two-hole nut.
Steps for fitting, tightening, and loosening the quick-clamping nut.
How to adjust speed and safely operate the tool's on/off switches.
Techniques for grinding, roughing, cut-off, and sanding.
Guidance on wire brush safety and motor cleaning.
Information on obtaining spare parts and service.
Instructions for disposal and details of the product warranty.
Statement of compliance with relevant EC directives and standards.
