Würth HNG 26 N User Manual

Art. 0949 610
Art. 0949 810
BLINDNIETSETZZANGE
MANUAL RIVET SETTING
TOOL
HNG 26 N
HNG 28 N
Originalbetriebsanleitung
Translation of the original operating instructions
Traduzione delle istruzioni di funzionamento originali
Traduction des instructions de service d’origine
Traducción del manual de instrucciones de servicio original
Tradução do original do manual de funcionamento
Vertaling van de originele gebruiksaanwijzing
Oversættelse af den originale betjeningsvejledning
Original driftsinstruks i oversettelse
Alkuperäiskäyttöohjeen käännös
Översättning av bruksanvisningens original
Μετάφραση της γνήσιας οδηγίας λειτουργίας
Orijinal işletim kılavuzunun çevirisi
Tłumaczenie oryginalnej instrukcji eksploatacji
Az eredeti üzemeltetési útmutató fordítása
Překlad originálního návodu k obsluze
Preklad originálneho návodu na obsluhu
Traducerea instrucţiunilor de exploatare originale
Prevod originalnega Navodila za uporabo
Превод на оригиналното ръководство за експлоатация
Originaalkasutusjuhendi koopia
Originalo naudojimosi instrukcijos vertimas
Ekspluatācijas instrukcijas oriģināla kopija
Перевод оригинала руководства по эксплуатации
Prevod originalnog uputstva za rad
Prijevod originalnih uputa za rad

Würth HNG 26 N Specifications

General

Material	Steel
Thread Size	M3 - M6
Length	260 mm
Tool type	Rivet Nut Tool
Application	For setting rivet nuts
Rivet Nut Range	M3, M4, M5, M6
Type	Hand Rivet Nut Tool

Summary

Safety and Product Details

Safety Instructions and Precautions

Covers general safety, warnings against modification, and mandatory personal protective equipment.

Technical Data and Colour Coding

Details product specifications, including art numbers, sizes, weight, length, and mouthpiece colours.

User Guide and Operations

Intended Use and Improper Operation

Defines the tool's purpose and warns against misuse, stating user responsibility for resulting damage.

Start-up and Operational Steps

Guides through initial setup, handling safety, replacing parts, and adjusting the tool for operation.

Maintenance, Care, and Disposal

Provides instructions for tool maintenance, care, and environmentally responsible disposal of the device.

Warranty and Technical Changes

Outlines the warranty policy, conditions for claims, and notes on technical changes and errors.