Würth MINI User Manual

8
Note
Modication of the device or manu-
facturing of additional devices is not
permitted. Such modications can re-
sult in personal injury or malfunctions.
■ Only appointed and trained personnel may
carry out repairs to the device. For such
purposes, always use original spare parts
from Adolf Würth GmbH & Co. KG. This will
ensure the continuing safe operation of the
device.
Warning
Do not look directly at the lamp
when it is switched on - Risk of eye
injuries!
Attention
The luminous elements of the lamp
cannot be changed by the user.
■ Socket load:
Observe the information on the type plate!
■ Use only original Würth accessories
and spare parts.
Note on the use of lamps with
'
-mark according to EN60598-2-24
IP 4x
Environment without dust deposition
IP 5x
Environment with deposition of non-electrically conducting
dust
IP 6x
Environment with deposition of electrically conducting dust
For Your Safety
Please read and comply with this
instruction manual prior to rst use of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
WARNING - Prior to rst use
always read the Safety instruc-
tions!
Failure to observe the instruction manual and the
safety instructions could result in damage to the
device and danger for the operator and others.
Safety instructions
GB

Würth MINI Specifications

General

Run Time	3 h
Luminous Flux	150 lm
Light Duration	3 h
Housing Material	Plastic
Length	163 mm
Power Source	Battery