A6: Check you have entered all your details correctly when programming
the scale.
A7: If you have tried all the above and the scale is still not working
correctly, for further advice, contact the Conair Customer Care Line on:
0845 2 668951 (09:00 to 17:00 Monday to Friday) or alternatively email
your enquiry to ukinfo@conair.com.
Q: Is my scale accurate? / I get different readings when I get on and
off the scale several times.
A1: Make sure the scale is on a at, level surface for accurate operation
and safety.
A2: This scale is a precise measuring instrument that is most accurate
when weighing a stationary object. To ensure accurate readings,
always try to stand on the same area of the scale’s platform and DO
NOT MOVE.
A3: It’s important not get on and off the scale repeatedly. As the scale is
so accurate, even a slight change in your position will cause a different
reading and the scale will round up or down to the nearest increment,
further adding to the difference.
A4: Do not keep moving the scale to a new location, as this can cause
different readings. Try to keep it in the same place.
A5: It is best to measure yourself using the same scale, as results can vary
between scales due to manufacturing tolerances.
REPLACEMENT OF THE BATTERY
Your WW Scale is provided with provided with 2 batteries that can be
replaced by batteries of the same type: 3V-CR2032. To replace the
batteries:
• When the batteries are low, the display will show ‘Lo’ for a few seconds.
• The battery compartment is located on the underside of the scale.
To Next Page
Loading...