X – 60 Instructions Version 1.0 Page 11
23) As the case halves come apart, remove and save all of
the following parts: Top shaft, spacer, and two 3/8 X
3/16 bearings, Idler gear, two more 3/8 X 3/16 bearings,
& idler shaft, Ball differential and two ½ X 5/8 outdrive
bearings. You will need all the parts from inside the
transmission but the two case halves will not be
needed.
That’s it! You have now removed all the parts needed to build your X - 60!
To Next Page
Loading...