Need help?Do you have a question about the X-Factor X–60 and is the answer not in the manual?
Step-by-step guide for assembling the X-6 transmission components.
Steps for preparing the chassis and assembling the bulkhead.
Steps for mounting the assembled transmission and motor plate to the chassis.
Guide to assembling the rear hub carriers and associated components.
General| Scale | 1:10 |
|---|---|
| Battery Voltage | 7.4V |
| Charging Time | 2-3 hours |
| Motor Type | Brushed |
| Drive Type | 4WD |
| Suspension | Independent |
| Terrain | Off-road |
| Remote Control Frequency | 2.4 GHz |
| Material | Metal |
To Next Page