X-Factor X–60 - REAR COMPONENTS DISASSEMBLY; REAR CVDs & HUB CARRIERS

X – 60 Instructions Version 1.0 Page 7
REAR CVDs & HUB CARRIERS
8) Remove the wheels and tires. Save them and the
nuts for re-use.
9) Remove the two nuts that hold the top of the rear shocks on. Save them for re-
use. Slide the shocks off the bolts, and save the mounting bushings for re-use.
10) Remove the nuts that hold the shock bolts in the
tower. Remove the bolts, and save the bolts, nuts,
bushings and plastic nuts for re-use.
11) Remove the bolt that holds the bottom of each rear shock to the rear control arm.
Set the shocks and bolts aside for re-use. Do not lose the bushing in the bottom
shock eyes.