X – 60 Instructions Version 1.0 Page 32
BODY
D9) Paint that great J Concepts body, then remove the blue overspray shield,
cut out the wing, and bolt the wing to the body. Cut out the body along the
cut lines and carefully line the body up with the four body mounts, then
use your ream to make the four holes for the posts. If you are using an
FM radio, there is a small dimple for your antenna tube. Use the body
clips you saved. (They’re around here somewhere!)
D10) Put the wheels on – we won’t insult you with a picture – and let’s go
racing!!! We suggest you read the tuning section at least once just to
confuse yourself thoroughly and then,
Let’s show them how a really dialed truck performs out there!!!!
To Next Page
Loading...