X-FLOC FFB2000-Pro - Firmware Version Specific Operations; Automatic Shut Down Management; Battery Charge and Firmware Display

Radio Remote Control FFB2000-Pro
Page 4 of 9
X-Floc Dämmtechnik-Maschinen GmbH
Rosine-Starz-Straße 12 · 71272 Renningen · Germany
Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com
Button combination firmware version
1.0.
Button combination Function Explanation
+
Automatic shut down activation. The green overpressure display flashes. The
delay time before shut down can be set with
parameter 4.
+
Automatic shut down deactivation. The green overpressure display stops flashing.
Button combination firmware version
1.4.
Button combination Function Explanation
+
2×
Automatic shut down activation. The green overpressure display flashes. The delay
time before shut down can be set with parameter
4.
+
2×
Automatic shut down deactivation. The green overpressure display stops flashing.
Button combination firmware ver
sion 1.0.
Tastenkomb. Funktion Erläuterung
+
Battery charge display. The charge is displayed on the material scale:
1 = 10% ... 2 = 20%
10 = 100%
Button combination firmware version
1.4.
Tastenkomb. Funktion Erläuterung
+
Battery charge display. The charge is displayed on the material scale:
1 = 10% ... 2 = 20%
10 = 100%
Firmware version display.
The firmware version is displayed on the air
volume scale: 1.4.